Type BT7
Jolt Squeeze, Turnover Draw Moulding Machines
A combined jolt squeeze roll-over draw moulding machine with similar features to the BT5 with an applied jolt load to the table of 1814 kg. Capable of producing difficult to strip moulds in boxes of up to 60” x 40”. Extremely useful in the production of large brake drums and other deep draw codded work.
Special Features:
- Combined Jolt Squeeze
- Turnover Draw
- Tilting Roll-out Head
- Auto/manual Pneumatic Control
- Operational Safety Guards
- Low Maintenance
Overall Dimensions

Dimensions | ||
---|---|---|
A | 2205 mm | 98 5/8 in |
B | 521 mm | 20 ½ in |
C | 584 mm | 23 in |
D Max | 965 mm | 38 in |
D Min | 762 mm | 30 in |
E | 1457 mm | 57 3/8 in |
F | 3096 mm | 121 7/8 in |
G | 1718 mm | 67 5/8 in |
H | 1384 mm | 54 ½ in |
Technical data | ||
Jolt Capacity | 1814 kg | 4000 lb |
Squeeze Pressure | 18144 kg | 40000 lb |
Squeeze Stroke | 406 mm | 16 in |
Pattern Draw | 406 mm | 16 in |
Table Size | 1350 x 965 mm | 53 x 38 in |
Free Air consumption (Average per cycle) | 2.33 m³ | 82.5 ft³ |
Shipping Specifications | ||
Net Weight | 11176 kg | 26640 lb |
Gross Weight | 12090 kg | 28656 lb |
Case Size | 19.2 m³ | 680 ft³ |
*Jolt capacity and static squeeze pressure calculated at 90 PSI
*Static squeeze pressure increase by approximately 100% during simultaneous jolt squeezes
For further information on our Foundry Range please contact Foundry Sales:
Tel: +44 (0)17955 533441 • Fax: +44 (0)1795 538891 • E-mail: sales@bmmweston.co.uk