Type PBQ
A simultaneous Jolt / Squeeze high speed moulding machine featuring four poster construction similar to the PHJ range but utilising a shockless spring jolt pre compaction technique and a combined pneumatic squeeze function. These machines also allow the easy integration of a pattern shuttle.
Special Features:
- Noise Controlled High Frequency Jolt
- Simultaneous Jolt Squeeze
- Louvered Sand Hopper with High Intensity Aerator
- Accurate Centreline Draw Mechanism
- Pattern Spray System
- Optional Pattern Shuttle and Rapid Pattern Change System
- PLC Based Control System
- Automatic Lubrication
The PBQ range of machines are a 4-column, shuttle head style design that utilizes both a high frequency, short stroke jolt for pre-compaction of the mold as well as a simultaneous jolt squeeze for the final compaction. This machine is available with a pattern shuttle for the alternate production of cope and drag molds and a rapid pattern change system. This fully automatic machine is supplied with a PLC based electrical control system and is entirely pneumatically powered.
Intended for integration into fully automatic molding lines, the data shown below is representative of previously constructed machines. Each machine model can be customized to meet specific application requirements.
Technical data | ||
---|---|---|
Jolt Capacity | 794 kg | 1,750 lb |
Static Squeeze Force | 14,611 kg | 32,212 lb |
Dynamic Squeeze Force | 23,378 kg | 51,540 lb |
Squeeze Stroke | 254 mm | 10 in |
Pattern Draw | 381 mm | 15 in |
Table Size | 1,016 x 610 mm | 40 x 24 in |
*Jolt capacity and static squeeze pressure calculated at 90 PSI
Alternative table sizes, daylight openings and draw strokes are available upon request.
For further information on our Foundry Range please contact Foundry Sales:
Tel: +44 (0)17955 533441 • Fax: +44 (0)1795 538891 • E-mail: sales@bmmweston.co.uk