Type QSF 214
Match Plate Moulding Machine
A noise controlled Match Plate Moulding Machine designed for snap flask moulds. The more environmentally friendly jolt action does not reduce the moulding efficiency of the QSF214 as an increase to the Diameter of the squeeze cylinder greatly enhances both the static and dynamic squeeze pressures, resulting in moulds of a higher density. With a long pre-jolt stroke to aid sand distribution into pockets and corners, and a simultaneous jolt squeeze against the head developing a high dynamic pressure, uniformly hard cope & drag moulds are produced without distorting the Match-Plate. The simple manual controls are instinctive and arranged for maximum operator safety and minimum fatigue.
- Noise Controlled Pre Jolt
- No Simultaneous Jolt Squeeze
- Operational Roller on Pin Lift Draw
- High Pressure Hyrdaulic Squeeze
- Low Maintenance
The noise controlled jolt does not reduce the efficiency of the Type QSF214 Matchplate Moulding Machine.
By increasing the diameter of the squeeze cylinder a greatly increased static and dynamic squeeze pressure is achieved to produce moulds of even greater density.
With a long stroke pre-jolt to aid sand distribution into pockets and corners and a simultaneous jolt squeeze against the head developing a high dynamic pressure, unifromly hard drag and cope moulds are produced without distorting the matchplate.
The simple manual controls are instinctive and arranged for maximum operator safety and minimum fatigue.
|Jolt Capacity||454 kg||1000 lb|
|Static Squeeze Pressure||6284 kg||13855 lb|
|Dynamic Squeeze Pressure||10997 kg||24246 lb|
|Squeeze Stroke||133 mm||5 ¼ in|
|Table Size||635 x 521 mm||25 x 20 ½ in|
|Net weight||1018 kg||2240 lb|
*Jolt capacity and static squeeze pressure calculated at 90 PSI
Average air consumption per cycle 0.42 m³ - 15 ft³
For further information on our Foundry Range please contact Foundry Sales:
Tel: +44 (0)17955 533441 • Fax: +44 (0)1795 538891 • E-mail: firstname.lastname@example.org