Steam

The BMM Weston 1300 is a completely new Flatwork Ironer available in one to three rolls and standard widths of 2.5, 3.0, 3.3, 3.6 and 4.0 metres, designed to produce quality finishing at high production rates whilst minimising operating costs.

It is the result of a complete reappraisal of the fundamental principles of Flatwork Ironer design and construction that has resulted in employment of the latest technology in its operation and manufacture.

This development enables BMM Weston to advance their already high reputation for the manufacture of flatwork Ironers that are reliable, economic to run, give high production and comply with European Health and Safety regulations.

BMM Weston 1300 Flatwork Ironers feature

Optimised bed design that ensures efficient operation over a wide range of conditions.
Pneumatic raising and automatic aligning of beds and rolls
Integrated design of rolls and beds to ensure uniform heat transfer, thus optimising clothing life
Chest contours that eliminate gap pieces
Minimum energy needs for drive system
Simple, electronic, variable speed motor and drive system providing quiet, efficient, slip-free transition
Analogue information system
Inclined, ergonomically designed feed table for dafe, efficient hand or mechanical feeding.
Centralised moisture extraction system.
Thermally insulated.
Removable side covers for external servicing.

Optional extras include

Integral Fast Feed aid.
Feed through assembly.
Hoods and walkways.
Handrails and interconnected ladder.
Take-off table assembly.
Digital information system.
Steam trap monitoring.
High temperature clothing.
Feeder/Folder, plugs and sockets.
Special wiring to stop ironer from folder.

850dims

Dimensions
No. of rolls	1	2	3
Length - A	2286 mm	3836 mm	5447 mm
Width - B	4156 mm	4156 mm	4156 mm
Height - C	1781 mm	1781 mm	1781 mm
Technical data
No. of rolls	1	2	3
Working width	3000 mm	3000 mm	3000 mm
Roll diameter	1300 mm	1300 mm	1300 mm
Speed range*	0-30 m/min	0-40 m/min	0-52 m/min
Evaporative capacity	214 Kg/hr	428 Kg/hr	642 Kg/hr
Steam pressure	6.2-13.8 Bar	6.2-13.8 Bar	6.2-13.8 Bar
Steam consumption (max)	275 Kg/hr	550 Kg/hr	825 Kg/hr
Air pressure	5.5-7 Bar	5.5-7 Bar	5.5-7 Bar
Air consumption (free air lift cycle)	48 Litres	96 Litres	144 Litres
Electrical supply (standard)	380-415 Volts / 3ph + N / 50Hz
Electrical consumption	8 kW	13.5 kW	24.5 kW
Suction outlet (OD)	200 mm	200 mm	200 mm
Steam inlet NB	65 mm	65 mm	65 mm
Condense outlet NB	50 mm	50 mm	50 mm
Air inlet NB	10 mm	10 mm	10 mm
Export Case Dimensions
1 Roll	1 case	4300x2335x1876 mm
2 Roll	1 case	4300x2145x1876 mm
	1 case	4300x1839x1876 mm
3 Roll	1 case	4300x2145x1876 mm
	1 case	4300x1650x1876 mm
	1 case	4300x1839x1876 mm
* Maximum operating speed dependent on work type and moisture retention rate